Descrição do produto Overview Quick Details

Maximum Torque(Nm):

≤20Nm

Wheelbase:

≤600mm

Minimum Grand Clearance:

100-150mm

Tire Size:

310mm

Curb Weight:

≤100kg

Dimension:

718x598x310mm

Maximum Speed:

≤50Km/h

Driving Type:

2WD

Payload Capacity:

≤100kg

Differential Lock:

Equipped

Grade Ability:

≥25°

Fuel:

Electric

Displacement:

0

Transmission System:

Shaft Drive

Engine Type:

4-Stroke

Power:

> 1000W

Voltage:

24V

Transmission Type:

Automatic

Brand Name:

JROBOT

Place of Origin:

China

Size:

718*598*310mm

Self-weight:

40KG

Main Material:

Alloy steel/ Aluminum

Ground Clearance:

110mm

Steering:

Differential Steering

Max Over-obstacle:

90mm

Tire Diameter:

310mm

Rated Torque:

16.5NM

Operation Speed:

6KM/H

IP Code:

IP64

Packaging & Delivery Details Images Products Description Warthog-01 mini rc ugv is a universal and highly integrated wheeled robot chassis. The battery and BMS system, power supply module, DC brushless motor, high-precision encoder and driver, brake parts are concentrated in the chassis powertrain. Close layout provide users with a broad space for development and imagination.

ITEM	Warthog-01-S	ITEM	Warthog-01-S
Size	718*598*310mm	Operation Speed	6KM/H
Self-weight	40KG	SurfaceTreatment	Yellow Blasting
Main Material	Alloy steel/ Aluminum	IP Code	IP64
Ground Clearance	110mm	Max Load	25KG
Steering	Differential Steering	Max Cross Obstacle	250mm
Max Over-obstacle	90mm	Max Climbing	30°
Tire Diameter	310mm	Motor	24V DC Brushless
Rated Torque	16.5NM	Gear Ratio	24

Configuration List

Product	QTY	Product	QTY
Robot chassis	1	RC Controller & Receiver	1
Control driver	1	Robot Antenna	1
Li-po battery	1	Battery Charger	1
Paper Instructions	1	Tool box	1

Controlling System

Controller Specifications

Receiver

Function of transmitter

Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes. Aero basic •V tail •Twin Aileron Servos •Elev-flap mix •Twin Elevator Servos •air brake •Snap roll •Gyro mixing Glider (3 wing model: 1A+1F/2A+2F/1A+2F) •V tail •Twin Ailerons •Elevon •Butterfly •Offset •5 flight conditions (normal, start, flying, distance, landing) •IDLE- DOWN (ACRO), THR-CUT (ACRO HELI) (engine shut off), and MOTOR CUT (GLID) setups to allow precise engine/motor control for taxi and landings. •15 model type memory •New stick design with improved feel, adjustable length and tension. •Triple rates available by setting dual rates to 3-position switches. •Eight SWITCHES, 3 DIALS and 2 SLIDERS; completely assignable in most applications. •Trainer system includes the“functional” (FUNC) setting, which allows the student to use the AT9’s mixing, helicopter, and other programming functions even with a 4-channel buddy box. (Optional trainer cord required.) •AT9 transmitter features airplane friendly switch layout, with the trainer switch at the left hand (Mode 2), and a notched throttle to minimize throttle changes with rudder input. Defaults to ACRO model type. •AT9 transmitter features helicopter-friendly switch layout, with idle-up and throttle hold switches at the left hand, and a smooth, ratchet-less (unsprung) throttle for perfect hovering. Defaults to HELI(H-1 swash plate type) model type Helicopter (8 swashplate types, including CCPM ) • 3 Idle Ups • Throttle and Pitch Curves per Condition • Revo. Mixing • Gyro Mixing including Separate Settings per Condition • Delay • Governor Mixing Aircraft: • ATTITUDE (Normal, attitude, GPS, hover, F/S, Aux) • Throttle curve • Mix programmable

Why Choose Us

Reliable

Our office located in Shanghai China, welcome to visit us and do on site inspection any time. During Covid-19 period, we support on line factory visit and video meeting.

Professional

We have 2 production center and a 24-person engineer team with more than 2000 sucessful projects experience. We establish service teams for all of our customers to make sure each project's efficiency.

Best servise

We believe high quality and good servise makes good products. So we established a perfect pre-sale, sale and after-sale service mechanism. For all products we provide on-line or on-site pre-sale training and 1 year free warranty, lifetime maintenance to eliminate all customer concerns.

FAQ

1. Are you factory or only company?

We have factory to produce all kinds of chassis and complete solutions, such as firefighting robot, inspection robot, boat cleaning robot, etc. And attracted by our sufficient customer servise experience, we also authorised as general agency for some other brands.

2. Can you provide samples?

Due to the high cost and large volume for each model, we are sorry for not provide samples. But we support on site and the 3rd party inspection before delivery. Thanks for understanding.

3. How about the price and quality?

All of our products and accessories experience strict quality control process. We make sure all products we provide are newest model not eliminated stock ones.And we aims to provide the lowest price but with the best quality and service.

4. What payment term and how long the payment period?

T/T, 30%-50 deposit, balance before shipment after receiving our OQC report. We ask for 100% payment before shipment for new customers, for our A level customers we offer special payment period to help ease financial pressure.

5. How about the shipment?

Our packing meets international shipment standard. We can quote the price base on FOB, CIF & CNF with sea shipping or air as you like, you can choose our forwarder or yours accordingly. If Certificate of Country of Origion were needed, please let us know in advance.

Ver mais