Descrição do produto Overview Quick Details

Type:

Tank Container, T11

Length (feet):

20'

Capacity:

20000L

External Dimensions(l x W x H)(mm):

6058 x 2438 x 2591MM

Internal Dimensions(l x W x H)(mm):

20000L

Place of Origin:

Tianjin, China

Brand Name:

ACE

Name:

20ft fuel tank container

Material:

Corten-A

Frame Material:

SPA-H,Q345D or equivalent

Tank Material:

316L/SAN50028-7/WNr 1.4402/1.4404

Insulation:

Rockwood

Design Temperature:

-40 to +130 centigrade

Certificate:

BV, LR

Approval:

IMDG, CFR49, ADR/RID, AAR 600, CSC, TC, TIR, ISO UIC, US/UK DOT

Design Code::

ASME VIII Div. 2

Supply Ability

Supply Ability:

500 Piece/Pieces per Month iso tank container

Packaging & Delivery Hot Sale Products T11 ISO Tank Container Swap Body 35000L T11 Tank Container T14 Coating or Lining Tank T3 Bitumen Tank T50 Compreesed Liquefied Gas Tank T75 Refrigerated Liquefied Gas Tank Product Description

Specifications - 20ft Fuel Tank Container for Crude Oil/Diesel Oil/Petrol
Frame Dimensions (L x W x H)			6058 x 2438 x 2591 mm
Nominal Capacity			26000 litre (±0.75%)
Maximum Gross Mass			36000 kgs
Tare Mass			3510 kg (± 3%)
Design Temperature (Frame & Tank)			-40 to +130 °C
Pressure	Working	4 bar
		Test	6 bar
Material	Tank (Shell & Ends)	SANS 50028-7 Type 1.4402/1.4404 (C≤0.03%)
		Frame	SPA-H or equivalent
Insulation	Shell	Rockwool (50kg/m3) 50mm thick on aluminium foil.
		Ends	Glasswool (16kg/m3) thickness to suit on aluminium foil.
Steam Heating	6/8 runs. 110mm width stainless steel 304. 1" BSP inlet, 1" BSP outlet both with captive caps and cable. 4 bar working pressure, 6 bar test with warning decals and markings. A condensate drain is fitted.
Manhole	500mm low profile, 8 point fixing with Super Tanktyt Lid seal.
Safety Relief Assembly	1-off. 2½" BSP Supermaxi Highflow relive, without flameproof gauze. Pressure only set at +4.4 bar (63.8psi). The assembly is situated off centre on a tangential tank pad.
Air Inlet assembly	DN 40 ball valve terminating with 1½" BSP connection and cap. The assembly is situated off centre on a tangential tank pad.
Top Discharge	DN80 stainless steel 316 tank pad with a blind flange. The assembly is fitted on centre on a horizontal tank pad.
Bottom Discharge	DN80 45° Univalve Internal Footvalve part no. TBC fitted with an integrated butterfly valve terminating with a 3" BSP spigot with 3" BSP blind cap and chain.
Thermometer	A surface mounted analogue type is fitted to the rear end dished end of the tank. Dual scale -40°C to +160°C / -40°F to 320°F. The thermometer is fitted with a protection bar.
Document holder	A clear plastic document holder ø110mm is fitted to the rear right hand side beam. A drain hole is provided at the lowest point.
Calibration	A calibration plate marked in cm/litres is fitted on the spillbox side wall. No calibrated stainless steel grade dipstick and bracket fitted.
Design Code	ASME VIII DIV. 1
Approval	IMDG, US DOT CFR 49, RID/ADR, CSC, TC, TIR / Customs, UIC, ISO 1496/3

Production Process Contact us